Home

Maintenance-Free Corrosion-Resistant Steel Plate For Bridges

Friday, July 12, 2019 - 19:15

This study compared the fabrication requirements, corrosion resistance, mechanical properties, construction components, and cost of using traditional bridge steels and corrosion-resistant steels. Comparisons were made based on existing literature, discussions with and knowledge gained from industry experts, experimental testing, and field visits. Types of corrosion-resistant steel plate included in the study were galvanized weathering steel; steel plate meeting the chemistry requirements of ASTM A1035CS (and AASHTO M334M, Alloy Type 1035 CS); ASTM A709 Grade 50CR steel; and duplex stainless steels, such as Grades 2101, 2202, 2304, and 2205. The results showed that the galvanized weathering steel had performed well on a bridge for 6 years without any major issues. The steel plate meeting the chemistry requirements of ASTM A1035CS showed good corrosion resistance and material properties, and further research is recommended to determine its suitability for use as a steel bridge material. The ASTM A709 Grade 50CR steel showed good tensile and slip-critical bolted fatigue behavior that met the requirements of ASTM A709 Grade 50 steel. The study also showed that it can be successfully fabricated into a steel plate girder and has had good corrosion resistance in bridge applications. The study recommends that the Virginia Department of Transportation (VDOT) consider further implementation of ASTM A709 Grade 50CR steel and that the Virginia Transportation Research Council (VTRC) work with the VDOT districts on two bridge projects using the steel. The full report is available online at http://www.virginiadot.org/vtrc/main/online_reports/pdf/19-R21.pdf